magnetic effects of current solutions CBSE NCERT class 10

 magnetic effects of current solutions CBSE NCERT class 10 

1. Which of the following correctly describes the magnetic field near a long

straight wire?

(a) The field consists of straight lines perpendicular to the wire.

(b) The field consists of straight lines parallel to the wire.

(c) The field consists of radial lines originating from the wire.

(d) The field consists of concentric circles centred on the wire.

ans-(iv)

2. The phenomenon of electromagnetic induction is

(a) the process of charging a body.

(b) the process of generating magnetic field due to a current passing

through a coil.

(c) producing induced current in a coil due to relative motion between a

magnet and the coil.

(d) the process of rotating a coil of an electric motor.

ans-(iii)

3. The device used for producing electric current is called a

(a) generator.

(b) galvanometer.

(c) ammeter.

(d) motor.

ans-(i)

4. The essential difference between an AC generator and a DC generator is that

(a) AC generator has an electromagnet while a DC generator has

permanent magnet.

(b) DC generator will generate a higher voltage.

(c) AC generator will generate a higher voltage.

(d) AC generator has slip rings while the DC generator has a commutator.

ans-(iv)

5. At the time of short circuit, the current in the circuit

(a) reduces substantially.

(b) does not change.

(c) increases heavily.

(d) vary continuously.

ans-(iii)

6. State whether the following statements are true or false.

(a) An electric motor converts mechanical energy into electrical energy.

(b) An electric generator works on the principle of electromagnetic induction.

(c) The field at the centre of a long circular coil carrying current will be

parallel straight lines.

(d) A wire with a green insulation is usually the live wire of an electric supply.

ans-(a)false

       (b)true

       (c)true

       (d)false   

7. List two methods of producing magnetic fields.

• Current carrying conductor
• Electromagnets
•  Permanent magnets

8. How does a solenoid behave like a magnet? Can you determine the north and south poles of a current–carrying solenoid with the help of a bar magnet? Explain.

A solenoid behaves like a magnet in the following ways.

• The magnetic field produced by a current-carrying solenoid is very much similar to that of a bar magnet.
• Like a bar magnet, one end of the solenoid has N-polarity while the other end has S-polarity.

To determine the north and south poles, we bring N-pole of the bar magnet near one end of the solenoid. If there is an attraction, then that end of the solenoid has south polarity and the other has north polarity. If there is a repulsion, then that end of the solenoid has north polarity and the other end has south polarity because similar poles repel each other.

9. When is the force experienced by a current–carrying conductor placed in a magnetic

field largest?

When the conductor carries current in a direction perpendicular to the direction of the magnetic field, the force experienced by the conductor is largest.

10. Imagine that you are sitting in a chamber with your back to one wall. An electron

beam, moving horizontally from back wall towards the front wall, is deflected by a

strong magnetic field to your right side. What is the direction of magnetic field?

Here the electron beam is moving from our back wall to the front wall, so the direction of current will be in the opposite direction, from front wall towards back wall or towards us. The direction of deflection (or force) is towards our right side.
We now know two things :

• direction of current is from front towards us, and
• direction of force is towards our right side.

Let us now hold the forefinger, middle finger and thumb of our left hand at right angles to one another. We now adjust the hand in such a way that our centre finger points towards us (in the direction of current) and thumb points towards right side (in the direction of force). Now, if we look at our forefinger, it will be pointing vertically downwards. Since the direction of forefinger gives the direction of magnetic field, therefore, the magnetic field is in the vertically downward direction.

11. Draw a labelled diagram of an electric motor. Explain its principle and working.

What is the function of a split ring in an electric motor?

Electric Motor : The device used to convert electrical energy to mechanical energy is called Electric Motor. It is used in fans, machines, etc.
Principle : NCERT Solutions for Class 10 Science Chapter 13 Magnetic Effects of Electric CurrentElectric motor works on the principle of force experienced by a current carrying conductor in a magnetic field. The two forces in the opposite sides are equal and opposite. Since they act in different lines they bring rotational motion.

Working of an electric motor :
When current starts to flow, the coil ABCD is in horizontal position. The direction of current through armature coil has the direction from A to B in the arm AB and from C to D in the arm CD. The direction of force exerted on the coil can be found through Fleming’s left hand law.
According to this law, it is found that the force exerted on the part AB, pushes the coil downwards. While the force exerted on the part CD pushes it upwards. In this way, these two forces being equal and opposite form a couple that rotates the coil in anticlockwise direction.

When the coil is in vertical position, the brushes X and Y would touch the centre of the commutator and the current in the coil is stopped. Though current is stopped but the coil comes back in a horizontal state due to momentum.

12. Name some devices in which electric motors are used.

Electric motor is used in the appliances like electric fans, washing machine, mixers, grinders, blenders, computers, MP3 players, etc.

13. A coil of insulated copper wire is connected to a galvanometer. What will happen if

a bar magnet is (i) pushed into the coil, (ii) withdrawn from inside the coil, (iii) held

stationary inside the coil?

(i) As a bar magnet is pushed into the coil, a momentary deflection is observed in the galvanometer indicating the production of a momentary current in the coil.
(ii) When the bar magnet is withdrawn from the coil, the deflection of galvanometer is in opposite direction showing the production of an opposite current.
(iii) When the bar magnet is held stationary inside the coil, there is no deflection in the galvanometer indicating that no current is produced in the coil.

14. Two circular coils A and B are placed closed to each other. If the current in the coil

A is changed, will some current be induced in the coil B? Give reason.

Yes, some current will be induced in the coil B. When the current in coil A is changed, some current is induced in the coil B. Due to change in current in coil A, the magnetic field lines linked with coil A and with coil B get changed. This sets up induced current in coil B.

15. State the rule to determine the direction of a (i) magnetic field produced around a

straight conductor-carrying current, (ii) force experienced by a current-carrying

straight conductor placed in a magnetic field which is perpendicular to it, and

(iii) current induced in a coil due to its rotation in a magnetic field.

(i) Right hand thumb rule : If the current carrying conductor is held in the right hand such that the thumb points in the direction of the current, then the direction of the curl of the fingers will give the direction of the magnetic field.
(ii) Fleming’s left hand rule : NCERT Solutions for Class 10 Science Chapter 13 Magnetic Effects of Electric Current Stretch the forefinger, the central finger and the thumb of the left hand mutually perpendicular to each other. If the forefinger points in the direction of the magnetic field, the middle finger in the direction of current, then the thumb points in the direction of force in the conductor.
(iii) Fleming’s right hand rule : Stretch the thumb, forefinger and the central finger of the right hand mutually perpendicular to each other. If the forefinger points in the direction of magnetic field, thumb in the direction of motion of the conductor, then the middle finger points in the direction of current induced in the conductor.

16. Explain the underlying principle and working of an electric generator by drawing

a labelled diagram. What is the function of brushes?

Principle : The electric generator is based on the principle of electromagnetic induction. When a coil is rotated with respect to a magnetic field, the number of magnetic field lines through the coil changes. Due to this a current is induced in the coil whose direction can be found by Fleming’s right hand rule.

Working : When the armature coil ABCD rotates in a magnetic field produced by the permanent magnets, it cuts through the magnetic lines of force.
Due to the rotation of armature coil, the associated magnetic field changes and an induced electromagnetic force is produced in it. The direction of this induced electromotive force or current can be determined by using Fleming’s right hand rule.
In first half cycle the current flows in one direction by brush B1 and in second it flows in opposite direction by brush B2. This process continues. So the current produced is alternating in nature.
Functions of Brushes : Brushes in contact with rings provide the current for external use.

17. When does an electric short circuit occur?

In a domestic circuit, short-circuit occurs when live and neutral wire come in direct contact with each other without any resistance. The resistance of the circuit becomes zero and excessive current starts to flow through it.

18. What is the function of an earth wire? Why is it necessary to earth metallic

appliances?

Earth wire is a safety measure that provides a low resistance conducting path to the current. Sometimes due to excess heat or wear and tear, the live wire comes in direct contact with the metallic cover of the appliances, which can give an electric shock on touching them. To prevent from the shock the metallic part is connected to the earth through a three-pin plug due to which the current flows to the earth at the instant there is a short circuit.

It is necessary to earth metallic appliances because it ensures that if there is any current leakage in the metallic cover, the potential of the appliance becomes equal to that of the earth. The potential of the earth is zero. As a result, the person handling the appliance will not get an electric shock.